气体增压泵故障分析

气体增压泵在使用过程中难免出现点问题,下面气体增压泵生产厂家将为您分享一下气体增压泵如果不能正常工作,有如下几种可能.

Problem is the emergence of gas booster pump in use process, the gas booster pump manufacturers will provide you share gas booster pump if it does not work, there are several possible

1、驱动活塞密封伯磨损,导致活塞上侧和下侧串气;

1, the drive piston seal "wear, causing the piston upper and lower side hernia;

2、控制阀损坏,导致换向阀不能正常工作;

2, control valve damage, lead to the valve does not work;

3、换向阀太脏,或它的密封件损坏,导致它不能动作;

3, reversing valve is too dirty, or the seal is damaged, leading to not move;

4、两活塞连接处损坏,开口销脱落,两活塞杆错位,导致活塞杆不能移动;

4, two piston joint damage, split off, two piston rod dislocation, causes the piston rod can not move;

5、增压缸密封件漏气.

5, a pressurizing cylinder seal leakage

在气体增压泵工作中有机会出现这种情况:需增压气体被断开,却开着增压泵,增压泵噪声也很大.此进增压泵工作频率很高,压力却无法加上去,增压泵噪声也很大.长时间这样工作,很容易损坏泵.同样道理,当增压泵出口压力很低时,增压泵工作频率会很高,增压泵也容易损坏

Have the opportunity to appear this kind of circumstance in gas booster pump work: pressurized gas is disconnected, but open the booster pump, booster pump noise is high. The booster pump working frequency is high, the pressure is not added, the booster pump noise is also great. Long time like this, it is easy to damage the pump the same way., when the pressure pump outlet pressure is very low, the booster pump working frequency will be high, a booster pump is easy to damage

本文有气体增压泵 http://www.xinmingte.com整理编辑，转载请附上网址

---

当前位置： 首页 >> 公司动态 >> 行业资讯 发布时间： 2014-08-17
上一篇： 爆破试验台的系统特点 下一篇： 气液增压泵中单向阀的作用