爆破试验台施工工艺技术

爆破试验台的台面平坦、润滑,需求边际切开规整,四边平直,无显着凹凸表象.贴面和封边部件紧密、平坦,不允许有脱胶、鼓泡、洼陷、压痕、外表划伤、麻点、裂缝、崩角和刀口等. 爆破试验台:http://www.xinmingte.com/

Blasting test flat surface, lubrication, neat demand marginal incision, four straight, no significant bump phenomenon. Veneer and sealing parts, a flat close, degumming, bubbling, sag, indentation, scratch, crack appearance, pitting, chipping and knife edge is not permitted.

各涂层均匀,钢制或木制板外表平坦,五色差、无拼接、无显着凹凸、无斑驳、无划痕、无碰伤等残损.切开、钻孔和倒角无毛刺,外表的圆角、倒棱均匀共同.

The uniform coating, steel or wooden plate is flat, color difference, no splicing, no significant bump, no peeling, no scratches, no bumps and other damage. The incision, drilling and chamfering without burr, the appearance of the fillet, chamfer uniform.

柜体的每一块,其四个边有必要用优质热熔胶经高温高压作防水封边处置.

The body of each piece, the four side there is a need for high quality hot melt glue by high temperature high pressure waterproof sealing disposal.

柜体的板块与板块之间的衔接,选用优质三合一内预埋衔接件,在放置三合一衔接件的"L"形孔洞的两头有必要注满黄胶,以增强握钉力,抗弯弧变形、防渗水、防摇晃.并一起运用滚花木质圆棒棰,带胶安稳加固衔接.

Connection between the plate and the cabinet body, made of high quality three in one embedded within the connection pieces, placed in two three in one connector "L" shaped holes is necessary to fill the yellow glue, to enhance the nail holding ability, anti bending deformation, seepage of water, anti shake. And together with the knurled wood rod whip, adhesive and strengthening cohesion.

爆破试验台柜体的板块与五金配件之间的衔接,在巩固一切螺钉之前,有必要打一个小于螺钉直径和长度的孔,高压写入胶水后,再行拧入螺钉,以增强握钉力,如为螺钉与螺母衔接可在外.

一切柜体衔接结实,无松动表象;外表平坦无显着变形;显露有些无毛刺及尖利锋芒.

零部件无开裂或劈裂表象,不会呈现影响运用功用的磨损变形表象,可动有些(例如可调式地脚、活动隔板等)活动灵活,用手掀压不会呈现永世形变形或松动,抗压才能契合实验台的需求.

单相三线电源插座与两线插头相兼容.

一切水、电、气路需求安全、适用,并隐藏式装置.

爆破试验台产物尺度需求:长、宽、高差错点≤3mm;邻边笔直度:台面对角线、结构对角线1000mm≤3mm; 2000mm≤4mm; 3000mm≤5mm.

相关文章: 气体增压泵正确选择考虑因素

---

当前位置： 首页 >> 公司动态 >> 行业资讯 发布时间： 2014-09-20
上一篇： 气体增压泵安装操作详细说明 下一篇： 爆破试验台气体汇流排常识