爆破试验台控制系统性能决定因素

爆破试验台所有承压零件都采用国际知名品牌的标准零件，无任何焊接连接，方便拆卸，安全系数高，寿命长，便于维护。

Blasting test-bed all pressure parts are standard parts of international famous brand, without any welding connection, convenient disassembly, high safety factor, long service life, easy maintenance.

驱动气体的压力和流量:气体增压泵和动力单元在连续工作时使用的驱动气压不超过0.69Mpa,在间歇工作时可达到1.03Mpa.在最佳性能状态时气动泵的耗气量,请参照所需驱动气体流量表.

Pressure and flow driven gas: driving pressure gas booster pump and a power unit used in continuous operation shall not exceed 0.69Mpa, the intermittent work can reach 1.03Mpa. in the best performance state aerodynamic consumption of air pump, please refer to the driving gas flow meter.

输送液体介质:气体增压泵泵输送的液体介质是气动增压泵的选型中着重考虑的部分.液压部分的材质和液压密封圈是由输送的液体介质所决定的.泵可用油、水和大多数液体介质.

The delivery of liquid medium: liquid gas booster pump delivery pump is considered in the selection of pneumatic booster pump parts. Material and hydraulic parts of the sealing ring is determined by the liquid medium conveying the. Pump available oil, water and most liquid medium.

爆破试验台标准泵的主要液压密封圈是丁橡胶和聚氨酯,单向阀座采用特氟龙密封.其它密封材料包括碳氟化合物和亚乙基丙烯,这些密封材料主要用于输送的特殊介质.请向工厂或当地的分销商咨询密封材料选型.

The main hydraulic blasting test standard pump seal ring is chloroprene rubber and polyurethane, one-way valve seat with Teflon seals. Other sealing materials including fluorocarbon and ethylene propylene, the sealing material is mainly used for special media delivery. Please refer to the factory or a local distributor for sealing material selection.

控制系统由上位机和下位机上下两级控制系统组成,上位机主要完成图形处理、数据处理、数据管理,用独立的控制单元,真正实现了模块化控制.下位机根据上位机的指令控制水压系统实现目标压力,能够精确控制压力的精度,保压效果好,实时自动补压,并具有断电自动保存、通电后继续试验的功能,确保试验的连续性.手动控制及计算机控制方式可以任意选择.

相关文章：爆破试验台双级系统运行原理

当前位置：首页 >> 公司动态 >> 行业资讯发布时间： 2014-09-16
上一篇：爆破试验台计算机控制试验的操作下一篇：气密性检测装置气体互换工作流程