气体增压泵的正确选型

为了使订购的气体增压泵处于最佳工作状态，在选择气体增压泵泵时必须要从多方面进行考虑：In order to make the gas booster pump ordered in the best working condition, in the choice of gas booster pump must be to consider many aspects: 1.工作压力和流量1 working pressure and flow 气体增压泵和动力单元的工作压力参照驱动气压为0.48Mpa时泵输出压力和流量。如果泵的最大输出压力大于所需的工作压力，这就要考虑安全措施。对于最大输出压力，请参照产品目录中的“静态下驱动气压力和输出液压近似比率表”。动力单元的选型与泵一致。Gas booster pump and a power unit of work pressure according to the driving pressure of 0.48Mpa pump output pressure and flow. If the maximum pump output pressure is greater than the required working pressure, it is necessary to consider the safety measures. For maximum output pressure, please refer to the catalogue of "static driving gas pressure and output hydraulic approximation ratio table". Consistent selection and pump power unit. 2.驱动气体的压力和流量 The 2 driving gas pressure and flow 气体增压泵和动力单元在连续工作时使用的驱动气压不超过0.69Mpa，在间歇工作时可达到1.03Mpa。在最佳性能状态时气动泵的耗气量，请参照所需驱动气体流量表。The driving pressure gas booster pump and a power unit used in continuous operation shall not exceed 0.69Mpa, the intermittent work can reach 1.03Mpa. In the best performance state aerodynamic consumption of air pump, please refer to the driving gas flow meter. 3.输送液体介质3 the delivery of liquid medium 气体增压泵http://www.xinmingte.com/输送的液体介质是气动增压泵的选型中着重考虑的部分。液压部分的材质和液压密封圈是由输送的液体介质所决定的。泵可用油、水和大多数液体介质。标准泵的主要液压密封圈是丁橡胶和聚氨酯，单向阀座采用特氟龙密封。其它密封材料包括碳氟化合物和亚乙基丙烯，这些密封材料主要用于输送的特殊介质。请向工厂或当地的分销商咨询密封材料选型。Liquid gas booster pump is considered in the selection of pneumatic booster pump parts. The material and the hydraulic part of the sealing ring is determined by the liquid medium conveying. Pump available oil, water and most liquid medium. The main hydraulic pump sealing ring is standard chloroprene rubber and polyurethane, one-way valve seat with Teflon seal. Other sealing materials including fluorocarbon and ethylene propylene, the sealing material is mainly used for special medium conveying. Please refer to the factory or a local distributor for sealing material selection. 4.气体增压泵可接受的体积和重量对于某些的应用，气体增压泵和动力单元的外形尺寸和重量也要重点考虑4 gas booster pump acceptable volume and weight for some applications, the size and weight of gas booster pump and a power unit should also be considered

当前位置：首页 >> 公司动态 >> 行业资讯发布时间： 2014-09-06
上一篇：浅析爆破试验台压力容器下一篇：爆破试验台的工艺技术