气液增压泵介绍软管泵如何工作

1.软管泵的结构和工作原理的介绍The structure and working principle of the 1 hose pump 软管泵是由泵壳、转子体、减速机、机座和软管等5大部分组成。软管泵工作时，转子体旋转，转子体上的1对压辊沿着1根特制的胶管旋转，压辊与泵壳产生的挤压力将胶管压扁，在管子自身弹性和侧导辊的强制下，通过恢复原状产生的真空吸入液体，液体在压辊的机械挤压下从管内排出，这样往复循环。该泵结构简单，制作容易。气液增压泵的耐久性主要决定于管子的弹性和耐腐蚀性，其流量与电动机的转速和管子内径大小有关，所以，关键在于选择管子和转速调控机构，只要管子有足够长的寿命、转速稳定，长期保持定量输送是没有问题的。Hose pump is composed of pump casing, rotor, reducer, base and hose consists of 5 parts. Hose pump work, the rotor rotation, the rotor of the 1 pairs of rollers rotate along 1 special rubber hose, pressure roller and the pump shell generated extrusion will hose flattening, forced on the tube its elasticity and side guide roller, vacuum generated by the restitution of the inhalation of liquid, liquid discharge from the tube in the roller mechanical extrusion, the cycle is repeated. The pump has the advantages of simple structure, easy fabrication. The durability of the gas-liquid booster pump is mainly determined by the flexibility and corrosion resistance, the speed and the inner diameter of the pipe size of the flow and motor related, therefore, lies in choosing the pipe and speed regulator, as long as the tube with a sufficiently long service life, stable speed, maintain long-term quantitative delivery is not a problem.2.软管泵的主要特点The main characteristics of the 2 hose pump (1)属容积式泵类，其有无机械密封、自吸能力强、自清理等特性。(1) is a volume type pump, which has no mechanical seal, strong self-priming capacity, self cleaning features. (2)无泵阀、填料函，不会产生密封类泵的泄漏和气阻现象。(2), no valve stuffing box, will not produce a sealed class pump leakage of air resistance phenomenon. (3)结构简单，适应性强，液体、气体、浆状和粘稠悬浮物料均可输送，特别是光滑的软管空腔能泵吸有杂质的液体、各种纤维物体以及含粒径在软管直径1/4以下的固体料浆，且不产生任何堵塞。(3) has the advantages of simple structure, strong adaptability, gas, liquid, paste and viscous materials suspension can transport, especially the hose cavity smooth can pump liquid impurities, various fiber objects and particle size on the solid slurry tube diameter less than 1/4, and does not produce any plug. (4)运行前不需灌泵，干运行时，不会产生主轴封等故障，泵吸送的液体仅与胶管接触，故能输送橡胶所能承受的腐蚀性及磨蚀性介质，可以代替一般不锈钢泵。(4) without irrigation pump operation, dry run, no shaft seal failure, pump suction conveying liquids only and hose contact, so it can transport rubber can withstand the corrosive and abrasive media, can replace the general stainless steel pump. (5)可以正反向旋转，不设定进出口，动力消耗少，水力和容积效率高。(5) can be forward and reverse rotation, do not set import and export, less power consumption, and high volumetric efficiency of hydraulic. (6)具有很好的计量能力，可以用作计量泵，可通过选择管子的尺寸和调节转速改变流量，流量范围广(3～9m3/h)，计量精度、重复精度高(6) with the measurement capability is very good, can be used as a metering pump, through the choice of tube size and adjust the speed changing flow, wide flow range (3 ~ 9m3/h), measuring accuracy, high repeat precision (7)管子材质繁多(乙烯塑料、尼龙、橡胶以及硅橡胶等)，适用于输送各种腐蚀性、有毒、无菌、放射性等介质。管内径0.5～75mm，工作压力最高可达。.98MPa，工作温度为-62～+260’℃管子的挤压接触部分寿命一般为200～700h。当不能继续使用时，可移换管子的挤压部位或更换新管子。(7) tube material variety (vinyl plastic, nylon, rubber and silicone rubber), for conveying a variety of corrosive, toxic, radioactive and other medium, sterile. Tube diameter of 0.5 ~ 75mm, the maximum working pressure. .98MPa, the working temperature is -62 ~ +260 ℃ contact part of life of extrusion "pipe is generally 200 ~ 700h. When can not continue to use, can be extruded parts replaced or the replacement of the new tube. (8)1个泵头可装1-20根管子或1台泵安装多组泵头工作，同时输送1种或多种介质。1泵多用，1台气液增压泵http://www.xinmingte.com/可代替数台泵(吸、排可同时作业)，工作体积小、效率高口(8) 1 pump head can be provided with a plurality of groups of pump head work with 1-20 tube or 1 pumps, while delivering 1 or more media. 1 multi-purpose pumps, 1 gas-liquid booster pump can replace several pumps (suction, exhaust can work at the same time), small volume, high efficiency and work

当前位置：首页 >> 公司动态 >> 行业资讯发布时间： 2014-09-03
上一篇：气液增压泵讲解水泵油漆、包装、运输和储存下一篇：气体增压泵讲解软管检测方法以及泵头得型号选择