气体增压泵增压多种气体介质

气体增压泵特点Gas booster pump characteristics1.可以增压大部分气体，包括各种腐蚀性气体(内部核心是不锈钢材质)，压力测试范围大从几公斤到900公斤可以无级别限制调节气体压力，只需要通过控制低端气体压力便可以实现高端气体压力的调节控制。1. To most gas pressurization, including all kinds of corrosive gas (internal core is stainless steel material), the pressure testing range from a few kg to 900 kg can adjust the gas pressure level constraints, need only by controlling the low gas pressure can achieve high gas pressure regulation control.2.气体增压泵http://www.xinmingte.com/运转声音低，只需要2公斤--8公斤压缩气体即可驱动，无需任何电源，对于易燃易爆气体安全性系数高。2. Gas booster pump running voice low, only need 2 kg - 8 kg can be compressed gas drive, without any power supply, for flammable and explosive gas safety coefficient is high.3.在外部温度低于+5°c时，调节吸入空气温度，也就是冷空气温度3. When the outside temperature is lower than + 5 ° c, adjust the intake air temperature, air temperature4.设备可扩展性强，可以选择电脑控制，plc控制，手动控制，并可以随时的显示出压力数值，压力数值的显示可以自由选择，包括压力表，数显压力表，电脑显示曲线等。4. Equipment strong scalability, can choose the computer control, PLC control, manual control, and can show the pressure value, pressure numerical display are free to choose, including pressure gauge, pressure gauge display, computer display curve and so on.5. 设备重量轻，体积小，携带方便，可以随意移动。重量为35Kg左右。5. Equipment, light weight, small volume, easy to carry and can move at will. The weight of 35 kg.6.使用简单，只需要选择软管便可以方便的使用。配备有气体净化系统，可以方便的过滤干燥气体。6. Simple to use, only need to select the hose can be convenient to use. Equipped with gas purification system, easy to filter and dry gas.在气体增压泵的气驱部分该系列需用润滑型气体，以便让密封和其他内部零件得到润滑，该系列泵的驱动活塞直径为160mm.In gas booster pump gas drive part of the series need lubrication type gas, so that the lubrication, sealing and other internal parts of this series of pump to drive the piston diameter is 160 mm.

当前位置：首页 >> 公司动态 >> 行业资讯发布时间： 2014-08-27
上一篇：气体增压泵散热软管需要脉冲实验台的检测帮助下一篇：气体增压泵增压系统典型应用