气体增压泵解决了工厂内部气源压力不足的问题

工厂为获得高压用气或高压瓶装气体，可将气体增压泵与有关配件组成完整的系统。直接使用。Factory in order to obtain high pressure gas or high-pressure bottled gas, gas booster pump can be complete systems and related accessories. Use directly.气体控制单元和截止阀安装在驱动气体边，用消声器降低噪音，在预增压气体端选用一气体过滤器，在气体输出端，安装一压力表，截止阀和针阀。Gas is used to drive the gas control unit and globe valves installed in the side, with a muffler to reduce noise, on the pre pressurization gas end use a gas filter, the gas output, to install a pressure gauge, the cut-off valve and needle valve.为使应用方便，气体增压泵与配件可组成一完整的动力单元In order to make convenient application, gas booster pump and accessories can form a complete power unit同传统蓄能器相比，气体放大器系统产生的脉冲小；Compared with traditional accumulator, gas pulse produced by the small amplifier system;气体增压泵http://www.xinmingte.com/便于安装；Gas booster pump is easy to install;当耗气量最大时，蓄能器仍有一定的预留余地；When the largest gas consumption, accumulator is having some reserved room;工作压力可通过输气管线中的减压阀调节；Working pressure can be adjusted through the relief valve of gas transmission pipeline;输出压力可通过附加的减压阀被调节至工作场合所允许的工作压力范围内；Output pressure can be adjusted by additional pressure reducing valve to the workplace is allowed within the scope of work pressure;当减压器安装在气体放大器下游时，在不需校准的压缩空气驱动下，气体放大器即可达到最大的流量。When the pressure reducer installed in the gas downstream of the amplifier, in does not need calibration and is driven by compressed air gas amplifier can achieve maximum flow.可选择单独设备作为增压系统的上游设备；Can choose a separate equipment as an upstream of pressurization system equipment;当达到所设定的压力时，无额外能量消耗；When set pressure is reached, no additional energy consumption;安装、操作简单；Installation, operation is simple;无需额外的冷却系统；No additional cooling system;无需电源（可应用于需防爆的领域）。Without power supply (need) explosion-proof area can be applied to.

当前位置：首页 >> 公司动态 >> 行业资讯发布时间： 2014-08-24
上一篇：气体增压泵安装时应该注意哪些问题下一篇：简析泵头在使用过程中会遇到的常见问题