增压缸的故障处理方法

早期增压缸技术源于德国，重要技术是防补油过满装置消除了增压缸的补油问题。增压缸内的卡环限制了储油活塞移动，当增压缸加油过满，多余的油会从减压阀排放出去。达到设定压力或保压一段时间后，增压器不停检查增压器控制气路是否泄漏，主要检查撞针、换向阀阀芯的密封。Early pressure cylinder technology from Germany, technology is the important oil filled device eliminates the problem of filling oil pressure cylinder. Storage in pressurized cylinder, ring limits the piston to move, when the pressure cylinder gas through the full, extra oil discharge from the relief valve. Reach the set pressure or pressure after a period of time, the supercharger constantly check whether supercharger control pneumatic leak, mainly check the firing pin, reversing valve seal of valve core.检查气液增压泵http://www.xinmingte.com/增压器出口单向阀的密封是否损坏、磨损、老化。检查高压液密封件是否受损。增压器（泵）不上压，进口单向阀密封泄漏。高压密封件受损，此种情况液体将从消音器中喷出。增压器（泵）不保压，检查出口单向阀的密封件是否损坏。增压器动作缓慢，检查增压器的驱动气路是否受阻。Check the gas and liquid booster pump supercharger outlet check valve seal is damaged, wear and aging. Check whether the high pressure fluid seal is damaged. The supercharger (pump) pressure, import valve seal leakage. High pressure seal is damaged, this liquid will be spewing from the silencer. Supercharger (pump) is not pressure, check the outlet check valve seal is damaged. The supercharger slow, check whether the supercharger driven by pneumatic is blocked.检查气液增压泵增压器的控制气路是否受阻。检查增压器的撞针孔是否受阻，或变形。检查增压器驱动活塞的密封件是否漏气、磨损、老化。Check the control pneumatic gas-liquid booster pump supercharger is blocked. Check the supercharger pinhole is blocked, or deformation. Check whether supercharger driven piston seal leakage, wear and aging.

当前位置：首页 >> 公司动态 >> 行业资讯发布时间： 2014-08-20
上一篇：怎样换更气体增压泵液压油下一篇：气体增压泵设备的特点